AUTEC LK NEO 6 DF User Manual

4 Technical data
4.1 Technical data of LK NEO 6 and LK NEO 8 transmitting units (Model
LKN Type LA1CM)
Power supply (battery MHM03) .............................................................................. 3.6V
Power supply (battery LPM01) ............................................................................... 3.7V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions ............................................................... 207,5x85x49mm (8.17x3.35x1.92In)
Weight ....................................................................................................... 380g (0.837Lb)
Run time at 20°C (68°F):
- with battery MHM03 .................................................................................................... >8h
- with battery LPM01 ................................................................................................... >16h
4.2 Technical data of LK NEO 6 DF transmitting unit (Model LKN Type
DA1DM)
Power supply (battery LPM01) ............................................................................... 3.7V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions ............................................................... 207,5x85x49mm (8.17x3.35x1.92In)
Weight ....................................................................................................... 380g (0.837Lb)
Run time at 20°C (68°F) ............................................................................................ >10h
5 Technical Data Sheet
The Radio Remote Control 's Technical Data Sheet:
- describes the Transmitting Unit's con󰘰guration,
- indicates the relation between commands sent by the Transmitting Unit and those available
on the Receiving Unit.
The Technical Data Sheet must be 󰘰lled in, checked and signed by the Installer, who is
responsible for correct wiring.
A Technical Data Sheet must always be kept together with this Manual: if you need to use
the Technical Data Sheet for administrative purposes (tests, check, etc.), make a copy of it.
The wiring of the Receiving Unit's outputs must always re󰄉ect the wiring
indicated in the Technical Data Sheet.
AUTEC - AIR SERIES
Technical data 15
LIULK6N03_eng-00

AUTEC LK NEO 6 DF Specifications

General

Brand	AUTEC
Model	LK NEO 6 DF
Category	Transmitter
Language	English