25
series displays. Each selection narrows the focus and leads to the desired
test. Use your fingertip to make menu selections.
Diagnosis
The Diagnostics application allows you to establish a data link to the
electronic control system of the test vehicle for vehicle diagnosis. You can
operate functional tests, retrieve vehicle diagnostic information such as
trouble codes, freeze frame data and live data for various vehicle control
systems, such as engine, transmission, ABS, and more.
There are two options available when accessing the Diagnosis section:
1. Auto Scan – starts auto scanning for all the available systems on the
vehicle.
2. Control Units – displays a selection menu of all available control units
of the test vehicle.
After a section is made and the tablet establishes communication with the
vehicle, the corresponding function menu or selection menu displays.
Auto Scan
The Auto Scan function performs a comprehensive scanning of the
ECUs in the vehicle’s systems to locate and retrieve DTCs. The sample
operation screen of Auto Scan displays as below:
Figure 4-9 Sample Auto Scan Operation Screen
To Next Page
Loading...
