Autel MaxiCheck MX808 - Settings Operations; Unit

85
8 Settings Operations
Select the Settings application to open a setup screen to adjust the default
setting and view information about the MaxiCheck system. There are eight
system settings:
 Unit
 Language
 Printing Setting
 Notification Center
 Auto Update
 About
 System Settings
 Firmware
This section describes the operation procedures for the settings.
Unit
This option allows you to change the measurement unit for the
diagnostic system.
 To adjust the unit setting
1. Tap the Settings application on the MaxiCheck Job Menu.
2. Tap the Unit option on the left column.
3. Select the required measurement unit, Metric or English. A check
mark will display on the right of the selected unit.
4. Tap the Home button on the top left corner to return to the
MaxiCheck Job Menu or select another setting.