27
Deletes codes. A warning message screen will display to
inform you of possible data loss when this function is
selected.
Confirms the test result, and continues system diagnosis
after selecting the required system by tapping the item in
the Main Section.
Suspends scanning and it will change to
Continue button after tapped.
Returns to the previous screen or exit Auto Scan.
Control Units
This option allows you to manually locate a required control system for testing
through a series of choices. Please follow the menu driven procedures, and
make proper selection each time; the program will guide you to the
diagnostic function menu after selections are made.
The Function Menu options vary slightly for different vehicles. The function
menu may include:
Figure 4-10 Sample Function Menu
To Next Page
Loading...
