42
stop all communications with the vehicle before closing the Diagnostics
application.
NOTE
Damage to the vehicle electronic control module (ECM) may occur if
communication is disrupted. Make sure all connections, such as USB
cable and wireless connections, are properly connected at all times during
testing. Exit all tests before disconnecting the test connection or powering
down the tool.
To exit the Diagnostics application
1. From an active diagnostic screen, tap the Back or ESC functional
button to exit a diagnostic session step-by-step.
2. Or tap the Vehicle Swap button on the diagnostics toolbar to return
to the Vehicle Menu screen.
3. From the Vehicle Menu screen, tap the Home button on the
top toolbar; or tap the Back button on the navigation bar at the
bottom of the screen.
4. Or tap the Home button on the diagnostics toolbar to exit the
application directly and return to the MaxiCheck Job Menu.
Once the Diagnostics application is no longer communicating with the
vehicle, it is safe to open other MaxiCheck applications, or exit the
MaxiCheck Diagnostic System and return to the Android System’s Home
screen.
To Next Page
Loading...
