66
3. If there are DPF-related codes stored in DDE, the screen displays as
below. Select OK to continue or Cancel to exit this function.
4. The tool displays a list of particle filter tests. Select the
corresponding button to perform the desired test [1] [2] [3] [4] [5].
[1] Visual Inspection of Engine Oil
[2] Visual Inspection of Particulate Filter
[3] Function Check or Swirl Flaps
[4] Exhaust Backpressure Test
[5] Actual/Target Value Check-Mass Air Flow Sensor
Figure 5-29 Sample Codes Screen
To Next Page
Loading...
