Autel MaxiTPMS TS401 - Page 11

10
Figure 3.5
3) Press the Y button to save your settings and return to previous
menu, or press the N button to exit without change.
Pressure Unit
1) From System Settings screen, use the UP/DOWN SCROLL
button to select Pressure Unit, and press the Y button.
Figure 3.6
2) From Pressure Unit screen, use the UP/DOWN SCROLL
button to select the desired unit: Kpa, Psi or Bar. (Figure 3.7)
3) Press the Y button to save your settings and return to previous
menu, or press the N button to exit without change.