Autel MaxiTPMS TS408 User Manual

8
1. Locate the USB port of the device.
2. Connect the device and the power source with the USB cable adapter.
For optimum performance, always keep your tool sufficiently charged. It is
recommended that you charge the tool for over 2 hours before the first use.
NOTE
Only use the USB cable adapter that is included in our pack to charge this
tool. The use of un-approved power supplies may damage your tool and void
the tool warranty.
Power Up
Power up the TPMS tool by pressing the Power button, and wait for the
Main Menu to appear.
Figure 3-2 Sample Main Menu Screen

Autel MaxiTPMS TS408 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Charging Time	Approximately 3 hours
Display	320 x 240 dpi color display
Battery Capacity	3200 mAh
Supported Protocols	315 MHz and 433 MHz
TPMS Functions	TPMS sensor activation, programming, relearn, diagnostics
Languages	English, French, Spanish
Update Method	USB update
Battery	Rechargeable lithium polymer battery