Autel MaxiTPMS TS408 User Manual

35
About
This function allows viewing of tool data such as serial number and software
version number of the tool.
1. From System Setup screen, use the UP/DOWN scroll button to select
About, and press the Y button; wait for the About screen to display.
2. View tool information on screen. Press the N button to exit.
Figure 5-18 Sample About Screen
Product Troubleshooting
This part describes problems that you may encounter while using the TPMS
tool.
If the scan tool freezes, reset the tool:
 Turn the ignition off and wait for about 10 seconds. Turn the ignition
back on and continue testing.

Autel MaxiTPMS TS408 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Charging Time	Approximately 3 hours
Display	320 x 240 dpi color display
Battery Capacity	3200 mAh
Supported Protocols	315 MHz and 433 MHz
TPMS Functions	TPMS sensor activation, programming, relearn, diagnostics
Languages	English, French, Spanish
Update Method	USB update
Battery	Rechargeable lithium polymer battery