34
button to confirm your change or the N button to exit without change.
Figure 5-16 Sample Auto Power-off Screen
NOTE
1. Before the tool powers off automatically, it will save all the TPMS test
data. Next time when the tool is powered on, you may retrieve the
recorded data or return to the last operation.
2. When using external power, the scan tool stays on until turned off.
When using internal battery power, the scan tool turns off automatically
after a set time of inactivity.
Date and Time
This function sets time and date on tool.
1. From System Setup screen, use UP/DOWN scroll button to select Date
and Time, and press the Y button to confirm; wait for the Date and Time
screen to display.
2. Use UP/DOWN scroll button to increase or decrease the value and
LEFT/RIGHT scroll button to select the item to change.
Figure 5-17 Sample Date and Time Screen
To Next Page
Loading...
