Autel MaxiTPMS TS408 User Manual

24
5 Miscellaneous
ToolKit
Test strength of remoteless key fob signal.
1. Select ToolKit from the Main Menu and press the Y button to confirm.
2. The screen displays as below, select RKE & RF Monitor and press Y to
confirm.
Figure 5-1 Sample RKE & RF Monitor Menu
3. Hold the key fob close to the tool and press the function buttons on key
fob to test. If the button works and the key fob is sending a signal, the
tool will beep and the screen displays as below. If the button does not
work, the tool will do nothing. To make sure each button is working
properly, please test each button in turn.
Figure 5-2 Sample Receive Signal Screen
 The progress bar indicates the approximate signal strength of the
key fob.

Autel MaxiTPMS TS408 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Charging Time	Approximately 3 hours
Display	320 x 240 dpi color display
Battery Capacity	3200 mAh
Supported Protocols	315 MHz and 433 MHz
TPMS Functions	TPMS sensor activation, programming, relearn, diagnostics
Languages	English, French, Spanish
Update Method	USB update
Battery	Rechargeable lithium polymer battery