Autel MaxiTPMS TS408 User Manual

33
Figure 5-14 Sample Distance Unit Screen
3. Press the Y button to save your settings and return to previous menu, or
press the N button to exit without change.
Beep Set
This function allows you to turn on/off the built-in speaker for key pressing.
1. From System Setup screen, use the UP/DOWN scroll button to select
Beep Set, and press the Y button.
2. From Beep Set menu, use the LEFT/RIGHT scroll button to select ON or
OFF to turn on/off the beep.
Figure 5-15 Sample Beep Set Screen
3. Press the Y button to save your selection or the N button to exit without
change.
Power-off
1. From System Setup screen, use the UP/DOWN scroll button to select
Power-off, and press the Y button.
2. Press UP/DOWN scroll button to increase or decrease the amount of
time of inactivity before the tool automatically powers off. Press the Y

Autel MaxiTPMS TS408 Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Charging Time	Approximately 3 hours
Display	320 x 240 dpi color display
Battery Capacity	3200 mAh
Supported Protocols	315 MHz and 433 MHz
TPMS Functions	TPMS sensor activation, programming, relearn, diagnostics
Languages	English, French, Spanish
Update Method	USB update
Battery	Rechargeable lithium polymer battery