29
Figure 5-7 Sample Software Versions Window
Setting
The tool allows you to make the following adjustments and settings.
1. Market: Selects the operating region of the tool.
2. Language: Selects the operating language of the tool.
3. ID Format: Sets the ID display to Hexadecimal or Decimal.
4. Pressure Unit: Sets the pressure unit in kPa, Psi or Bar.
5. Temperature Unit: Sets the temperature unit in degrees to Celsius or
Fahrenheit.
6. Distance Unit: Sets the distance unit in km or mile.
7. Beep Set: Turns on/off key-press beep.
8. Power-off: Sets the amount of time of inactivity before the tool
automatically power off.
9. Date and Time: Sets date and time on tool.
TIPS
Tool is set to default settings until changes are made.
To Enter the Setting Menu
From the Main Menu: Select Setting and press the Y button. The Setting
menu displays as below.
To Next Page
Loading...
