Autel MaxiTPMS TS408 - System Setup - ID and Pressure; ID Format Setting; Pressure Unit Setting

31
Figure 5-10 Sample Language Selection Screen
ID Format
1. From System Setup screen, use the UP/DOWN scroll button to select
ID Format, and press the Y button.
2. From ID Format screen, use the LEFT/RIGHT scroll button to select the
desired ID format.
Figure 5-11 Sample ID Format Screen
3. Press the Y button to save your settings and return to previous
menu, or press the N button to exit without change.
Pressure Unit
1. From System Setup screen, use the UP/DOWN scroll button to
select Pressure Unit, and press the Y button.
2. From Pressure Unit screen, use the LEFT/RIGHT scroll button
to select the desired unit: kPa, Psi or Bar.