Autel MaxiTPMS TS508 - Using This Manual; Conventions

AUTOMOTIVE INTELLIGENCE
AUTOMOTIVE INTELLIGENCE
QuickStart Guide: MX-Sensor Programming
Advance Mode: Copy by Manual Input
QuickStart Guide: MX-Sensor Programming
Advance Mode: Copy by AutoCreate 1-16 Sensors
TS508
TS508
• PlaceanewMX-Sensornearthetopofthedevice
• PressYtosaveandprogram
3
• SelectAuto Create 1-16 Sensors
• Place1-16MX-Sensor(s)closetothetopofthetool
• PressYtoprogram
• Select Copy by Manual Input
1
• EntertheoriginalsensorIDintheeld
2
- Sensor programmed.
- The original sensor ID is copied to the new MX-Sensor.
4
- The tool will automatically detect the sensors near
the tool.
- Sensor programmed.
3
1 2
4