Autel MaxiVCI V200 User Manual

i
Trademarks
Autel
®
, MaxiIM
®
, MaxiCOM
®
, MaxiDAS
®
, MaxiScan
®
, MaxiTPMS
®
,
MaxiRecorder
®
, and MaxiCheck
®
are trademarks of Autel Intelligent Technology
Corp., Ltd., registered in China, the United States and other countries. All other
marks are trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the
latest information available at the time of printing. Autel reserves the right to make
changes at any time without notice. While information of this manual has been
carefully checked for accuracy, no guarantee is given for the completeness and
correctness of the contents, including but not limited to the product specifications,
functions, and illustrations.
Autel will not be liable for any direct damages or for any special, incidental, or
indirect damages or for any economic consequential damages (including the loss
of profits).
IMPORTANT: Before operating or maintaining this unit, please read this manual
carefully, paying extra attention to the safety warnings and precautions.
For Services and Support:
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
support@autel.com
For technical assistance in all other markets, please contact your local distributor.

Autel MaxiVCI V200 Specifications

General

USB Protocol	USB 2.0
Device Type	Diagnostic Interface
Connectivity	USB
Power Supply	Vehicle Power (12V/24V)
Wireless Connectivity	Wi-Fi (802.11 b/g/n)
Input Voltage	12 V
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 60°C
Languages	Multiple languages
Display	N/A (No display on the VCI itself)

Summary

Safety Information

Safety Messages

Explains safety messages and hazard level indicators used throughout the manual.

Getting Started

Universal Key Operations

Confirm Vehicle Information

Universal Key Generation Operation

Transponder Reading and Cloning

Transponder Reading

Explains how to read transponder data including chip type and IMMO ID.

Transponder Cloning

Guides on the procedure for cloning vehicle transponders.

Transponder Editing

Describes how to read and edit transponder configurations and EEPROM data.

Advanced Transponder Functions

Transponder Generation

Transponder Simulation

ID63 and ID83 Conversion

IMMO System Operations

Getting Started with IMMO

Guides on establishing vehicle communication for IMMO operations.

Vehicle Identification Methods

Details AutoVIN, Manual VIN, Automatic, and Manual selection for vehicle ID.

IMMO Screen Layout

Explains the structure of IMMO screens and their components.

IMMO Screen Messages

Describes confirmation, warning, and error messages within the IMMO application.

IMMO Selection Process

Explains the menu-driven selection for IMMO functions.

IMMO Options Overview

Lists key IMMO functions like Status Scan, Control Unit, Hot Function, and Info.

Specialized Tool Functions

IMMO Data Processing

Details processing IMMO data to create new keys.

Key Unlocking Procedures

Explains renewing used smart keys for new vehicles.

Toyota Smart Unlocking

Universal Key Information Detection

Button Customization

Ignition Coil Detection

Tool Settings and Configuration

VCI Manager

Data Management and Storage

Device Maintenance and Service

Maintenance Instructions

Troubleshooting Checklist

Offers solutions for common operational issues and troubleshooting.

Battery Usage Information

Service Procedures