Auto Meter RC-300 User Manual

10
11
3
REVIEW TESTS
From the main menu select REVIEW/PRINT.
BATTERY TEST
>REVIEW/PRINT
VOLT METER
DATABASE
The last test will be displayed.
OPTIONAL INFRARED PRINTER
Optional PR-12 printer. An invisible infrared beam links the RC-300
to the PR-12 printer from up to 15 ft. away. No connection cords are
needed. For more instructions on how to operate the printer consult
the printer manual.
Printer Type ------------------------------------ Thermal Printing
Paper ----2.25 in x 80 ft. Roll Thermal Paper (included)
Power -----------------------------------AC Adapter (included)
T#35 12V BATTERY
CHARGE AND RETEST
12.06V CHG 25%
MEAS AH 30.0
Press (Y Enter).
Press (+Up) or (-Down) key
to select the desired test.
PRINTING TEST RESULTS
Point the RC-300 in the direction of the PR-12 printer
with the printer’s IR receiver pointed in the direction of the
RC-300. Press (Print). You should be within 15 ft of the printer.
Wait for the screen to clear before moving the RC-300. It takes a
moment to send all the test data.
Make sure the Infrared
Printer is properly set up.
After a test is made with
the RC-300 make sure the
results are displayed on the
LCD.
Point the RC-300 in the
direction of the Infrared
Printer (within 15 ft.)
Press the <Print> key
and the test results will be
printed.
Depending upon the
test made the printer will
sometimes yield more
information than the LCD.

Auto Meter RC-300 Specifications

General

Brand	Auto Meter
Model	RC-300
Category	Measuring Instruments
Language	English