4
17
SAFETY
Carefully read all operating
instructions before using the
RC-300
Wear proper protection when
working around batteries.
Be sure each test is
complete before removing
load clamps to prevent arcing
and potential explosion from
battery gases. Keep sparks
ames, or cigarettes away from batteries.
Keep hair, hands, and clothing as well as tester
leads and cords away from moving parts.
Do not attempt to Load Test or charge a battery
under 20°F. Allow the battery to warm to room
temperature before testing or charging.
Warning! NEVER attach the RC-300 to a battery
that is connected to any other tester or charging
unit. Damage may result.
PC INTERFACE
ABOUT
The following will be displayed.
Press (Y Enter)
Press (Y Enter) and the
version will be displayed.
Scroll down to About.
Press (Y Enter) to select.
VOLT METER
DATABASE
>DOWNLOAD
SETUP
DATABASE
DOWNLOAD
SETUP
>ABOUT
CONNECT TESTER
TO A PC RUNNING
DATA SOFTWARE
'N' TO CANCEL
RC-300
VERSION 2.0
SERIAL# 12345
COPYRIGHT 2013
From the main menu scroll down to DOWNLOAD.
1. Using Auto Meter's optional adapter cord AC-12 insert the stereo
plug into the jack on the RC-300 and then plug the serial adapter
into a free serial port on the rear of your computer, or connect to
AC-32 serial port to USB adapter. Follow the instructions of the
AC-62 AMP Link Data Download software to retrieve data from
the RC-300.
From the main menu scroll down to the last selection.
CAUSE OF BATTERY FAILURE
Incorrect Application: Wrong size battery may have inadequate
Amp Hour rating for original product specications.
Improper Maintenance: Neglected charging and corrosion on
battery connections can greatly reduce battery life and affect battery
performance.
Overcharging: Overcharging caused by a high voltage regulator
setting or incorrect battery charging can cause battery damage and
shorter life.
Undercharging: Undercharging or neglect of charging will reduce
the life of the battery.
To Next Page
Loading...
Need help?
General
