AUTOHELM ST 50 plus - Page 38

On Power-Up
If you do not exit 'CODELOCK SET' within 10 seconds the display will
change to CANCEL CODE . You now have the option of
cancelling
the
code, by pressing
TRACK
to
return to the display, or exit as
described in action 14 above .
Your Code Number
For future reference, enter your chosen code number into the box below
.
For obvious reasons, please store this handbook in a safe place .
Operation
When the unit is powered on you are prompted to enter the code number .
To enter the
number, carry
out actions
4
to 12 above and press TRACK .
Action Display Shows
1 Press and DISPLAY and TRACK
together
for 4 seconds
CAL after 2 seconds and
Z146VXX after 4 sec .
2 Press
DISPLAY CODELOCK OFF
3 Press TRACK '_'_
__
4 Press UP or
DOWN
to
select
first number
1_ _ _
5
Press TRACK to accept number 1'_'_
_
6 Press UP or DOWN to select
second
number
12_ _
7 Press TRACK to accept number 12'_'_
8 Press UP or DOWN to select
third number
123_
9 Press TRACK to accept third number 1 2 3'_'
10
Press UP or DOWN to select
fourth number
1234
11 Press
TRACK to accept code '1234'
12 Press TRACK PWR ON?
13 Press TRACK within 10 seconds
CODELOCK SET
14 To exit CODELOCK, press DISPLAY
and TRACK together for 2 seconds
Normal operation