What to do if the AUTOLIFT Lifting Systems platform does not lower?
If the AUTOLIFT Lifting Systems platform isn't lowering, first check the battery. If the lowering valve isn't working, inspect the push-button panel and replace it if needed. As an alternative, use the emergency devices to lower the platform and replace any broken parts promptly.
How to troubleshoot if the AUTOLIFT MULTILINK F6EVO Lifting Systems platform does not come out of the housing?
If the AUTOLIFT Lifting Systems platform isn't coming out of the housing, first check the battery. Next, inspect the push-button panel and replace it if necessary. Also, ensure that normal operating conditions have been restored after any emergency operation.
Information about the lift manufacturer and contact details.
Details about the CE marking and identification plate on the lift.
Defines operator roles, qualifications (physical, mental, emotional, training), and responsibilities.
Explains the manual's structure, compliance, and usage guidelines.
Outlines critical safety precautions and warning symbols for lift operation.
Specifies conditions for warranty validity and manufacturer liability.
Lists and illustrates the main parts of the wheelchair lift device.
Provides technical drawings with key dimensions of the lift.
Presents specifications like capacity, weight, power, and pressure.
Defines the lift's purpose for transporting wheelchair users in vehicles.
Lists forbidden operations and states the manufacturer's non-liability for misuse.
Procedures for checking the lift upon delivery and its components.
Guidelines for storing the lift correctly to maintain its condition and warranty.
Instructions on how the lift should be transported and its packaging dimensions.
Safety precautions and methods for handling the packaged lift.
Specifies that installation must be done by authorized personnel only.
Explains the operation of the portable remote control and its buttons.
Step-by-step instructions for using the lift to enter and exit the vehicle.
Procedures for manual and external control operation during emergencies.
Details on required annual inspections by qualified technicians and record-keeping.
Outlines routine operations and their recommended inspection intervals (daily, 3, 6, 12 months).
Instructions for checking and adjusting hydraulic oil levels.
Explains the wiring diagram, symbols, and cable coloration.
Details pin assignments and functions for various electrical connectors.
Explains the symbols used in the hydraulic diagram.
A form to request spare parts from the manufacturer.
A logbook for recording lift inspection details and dates.
General| Brand | AUTOLIFT |
|---|---|
| Model | MULTILINK F6EVO |
| Category | Lifting Systems |
| Language | English |
To Next Page
