Automated Logic S6104 User Manual

Automated Logic Corporation • 1150 Roberts Blvd. • Kennesaw, GA 30144 • 770/429-3000 • 770/429-3001 Fax •
www.automatedlogic.com • Copyright 2002 Automated Logic Corporation. All rights reserved. Automated Logic, the
Automated Logic logo, SuperVision, Eikon, Alert, InterOp, and WebCTRL are registered trademarks of Automated Logic
Corporation. BACnet
®
is a registered trademark of ASHRAE. All other brand and product names are trademarked by
their respective companies.
Technical Instructions
S6104
Using the S6104 2
Specifications 3
Mounting 3
Addressing 3
Power Wiring 4
Network Communications 4
Using the S6104 on an ARC156 Segment 5
Using the S6104 on a Legacy CMnet 5
Connecting the S6104 to the Network 5
Communicating with the Workstation Using SuperVision 6
Communicating Through the LogiStat Port Using SuperVision 6
Communicating Through the Access Port Using SuperVision 7
Inputs 8
LogiStat Wiring 10
Digital Outputs 11
Analog Outputs 12
Writing GFBs for the S6104 12
Point Identifiers 13
Point Identifiers in WebCTRL 13
Channel Numbers in SuperVision 13
Transferring Memory 14
Transferring Memory in WebCTRL 14
Transferring Memory in SuperVision 15
Troubleshooting 15
Formatting the Module 15
LEDs 15
Protection 16
Production Date 16

Automated Logic S6104 Specifications

General

Product Type	Control Unit
Communication Protocol	BACnet MS/TP
Number of Universal Inputs	4
Number of Binary Outputs	4
Inputs	4 Universal Inputs
Outputs	4 Binary Outputs
Input Voltage	24 VAC

Summary

Using the S6104

S6104 Hardware Overview

Lists the S6104's key hardware features: 6 digital outputs, 10 universal inputs, and 4 analog outputs.

WebCTRL vs. SuperVision Capabilities

S6104 Specifications

Detailed System Specifications

Details power, input/output types, resolution, communication, environmental limits, memory, protection, and certifications.

LogiStat Sensor Wiring

LogiStat Port Configuration

Explains wiring LogiStat, LogiStat Plus, or LogiStat Pro sensors to the S6104's LogiStat Port.

S6104 Digital Outputs

Digital Output Operation

Details the operation of the 6 digital outputs, including manual/auto modes via HOA switches and status monitoring.

S6104 Analog Outputs

Analog Output Configuration

Explains the 4 analog outputs, their voltage support, resistance requirements, and wiring for 20mA devices.

Writing GFBs for S6104

GFB Creation and LogiStat Microblocks

Guides on creating GFBs using Eikon, including the use of LogiStat microblocks for LogiStat sensors.

S6104 Universal Input Channels

Universal Input Channel Details

Lists channel numbers, ranges, offsets, and gains for all 10 universal inputs in SuperVision.

Transferring Module Memory

WebCTRL Memory Download

Step-by-step guide on how to download memory to the S6104 module using WebCTRL.

SuperVision Memory Transfer

SuperVision Download Procedure

Details the process for transferring memory to the S6104 module using SuperVision v2.6b or later.

S6104 Troubleshooting

Module Formatting Procedure

Provides instructions for manually formatting the S6104 module as a last resort to restore communication.

LED Indicator Meanings

Describes the meaning of the Run and Error LEDs for troubleshooting S6104 module status.

S6104 LED and Protection Features

LED Signal Interpretation

Details the conditions indicated by different flash patterns of the Run and Error LEDs on the S6104.