EasyManuals Logo

Automated Logic S6104 User Manual

Automated Logic S6104
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Automated Logic Corporation 1150 Roberts Blvd. Kennesaw, GA 30144 770/429-3000 770/429-3001 Fax
www.automatedlogic.com Copyright 2002 Automated Logic Corporation. All rights reserved. Automated Logic, the
Automated Logic logo, SuperVision, Eikon, Alert, InterOp, and WebCTRL are registered trademarks of Automated Logic
Corporation. BACnet
®
is a registered trademark of ASHRAE. All other brand and product names are trademarked by
their respective companies.
Technical Instructions
S6104
Using the S6104 2
Specifications 3
Mounting 3
Addressing 3
Power Wiring 4
Network Communications 4
Using the S6104 on an ARC156 Segment 5
Using the S6104 on a Legacy CMnet 5
Connecting the S6104 to the Network 5
Communicating with the Workstation Using SuperVision 6
Communicating Through the LogiStat Port Using SuperVision 6
Communicating Through the Access Port Using SuperVision 7
Inputs 8
LogiStat Wiring 10
Digital Outputs 11
Analog Outputs 12
Writing GFBs for the S6104 12
Point Identifiers 13
Point Identifiers in WebCTRL 13
Channel Numbers in SuperVision 13
Transferring Memory 14
Transferring Memory in WebCTRL 14
Transferring Memory in SuperVision 15
Troubleshooting 15
Formatting the Module 15
LEDs 15
Protection 16
Production Date 16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Automated Logic S6104 and is the answer not in the manual?

Automated Logic S6104 Specifications

General IconGeneral
BrandAutomated Logic
ModelS6104
CategoryControl Unit
LanguageEnglish

Related product manuals