Automated Logic UNI/32 User Manual

Automated Logic Corporation • 1150 Roberts Blvd. • Kennesaw, GA 30144 • 770/429-3000 • 770/429-3001 Fax •
www.automatedlogic.com • Copyright 2001 Automated Logic Corporation. All rights reserved. Automated Logic, the
Automated Logic logo, SuperVision, Eikon, Alert, and InterOp are registered trademarks of Automated Logic
Corporation. BACnet
®
is a registered trademark of ASHRAE. All other brand and product names are trademarked by
their respective companies.
Technical Instructions
UNI/32
Using the UNI/32 2
Specifications 2
Mounting 3
Power Wiring 3
Communicating with the UNI/32 4
Connecting the UNI/32 to the U-cards 4
Connecting the UNI/32 to an ARC156, MS/TP, or Legacy CMnet network segment 5
Addressing 5
Transferring Memory 6
Transferring Memory in WebCTRL 6
Transferring Memory in SuperVision 7
Using Flow Sensors 7
Troubleshooting Tips 7
Communicating with the Workstation Using SuperVision 8
Formatting the Module 8
LEDs 9
Protection 9
Production Date 9

Automated Logic UNI/32 Specifications

General

Brand	Automated Logic
Model	UNI/32
Category	Control Unit
Language	English

Summary

Using the UNI/32

Specifications

Mounting

Power Wiring

Communicating with the UNI/32

Connecting the UNI/32 to the U-cards

How to connect the UNI/32 to U-cards via the Unet connection.

Connecting the UNI/32 to an ARC156, MS/TP, or Legacy CMnet network segment

Details on connecting the UNI/32 to various network types.

Addressing

Transferring Memory

Transferring Memory in WebCTRL

Step-by-step guide to transfer memory using WebCTRL.

Transferring Memory in SuperVision

Step-by-step guide to transfer memory using SuperVision.

Using Flow Sensors

Troubleshooting Tips

Communicating with the Workstation Using SuperVision

Formatting the Module

LEDS

Protection

Production Date