Automated Logic LGE

Automated Logic Corporation • 1150 Roberts Blvd. • Kennesaw, GA 30144 • 770/429-3000 • 770/429-3001 Fax •
www.automatedlogic.com • Copyright 1999 Automated Logic Corporation. All rights reserved. Automated Logic, the
Automated Logic logo, SuperVision, Eikon, and Alert are registered trademarks of Automated Logic Corporation.
InterOp is a trademark of Automated Logic Corporation. BACnet
®
is a registered trademark of ASHRAE. All other brand
and product names are trademarked by their respective companies.
Technical Instructions
LGE
Using the LGE 2
Specifications 3
Mounting 3
Addressing 3
LGnet Addressing 3
IP Addressing 4
Wiring 5
Power Wiring 5
Communications Wiring 5
Transferring Memory 6
Troubleshooting 6
Communicating with the Workstation 6
Formatting the Module 7
LEDs 8
Protection 8
Production Date 8

Automated Logic LGE Specifications

General

Manufacturer	Automated Logic
Enclosure Rating	IP20
Series	LGE
Type	Programmable Logic Controller
Communication Protocol	BACnet MS/TP
Inputs	Configurable universal inputs
Power Supply	24 VAC/VDC
Input Voltage	24 VAC/DC
Operating Temperature	0° to 50°C (32° to 122°F)
Mounting	DIN rail

Summary

Using the LGE Module

Mounting the LGE

Addressing Configuration

LGnet Addressing

Assigns the LGE's LGnet address using rotary switches and a DIP switch.

IP Addressing

Configures the LGE's IP address using default or assigned modes via DIP switch.

Wiring the LGE Module

Power Wiring

Connects the LGE to the 24VAC power source, ensuring correct polarity and voltage.

Communications Wiring

Details wiring for CMnet using ARC156 or legacy protocols and Ethernet.

Transferring Module Memory

Troubleshooting LGE Issues

Communicating with Workstation

Connects the LGE console or access port to a workstation for communication.

Formatting the LGE Module

Understanding LGE LEDs

Module Protection Features

Determining Production Date