Automatic Systems FirstLane 960 User Manual

The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the
use of the products or the execution of the project to which it refers, and from communicating it to third parties without Automatic Systems’ prior written agreement.
Document subject to change without notice.
FirstLane-MT-EN
p. 44 / 48
CN1
24 VDC Input
CN5
Local CAN BUS (not used)
CN9
Motor Encoder
1
+24 VDC
1
+24 VDC
1
Hall A
2
GND
2
GND
2
Hall B
3
CAN +
3
Hall C
CN2
24 VDC Output
4
CAN -
4
+12 VDC
1
+24 VDC
5
GND
5
GND
2
GND
6
+24 VDC
CN10
Motor power supply
CN3
Inter-unit CAN BUS
CN6
Programming AS (*)
1
Phase C
1
GND
2
Phase B
2
CAN +
CN7
Digital Inputs
3
Phase A
3
CAN -
1
IN 1
4
GND
2
IN 2
CN11
Pictogram
3
+ 24 VDC / 0.75 A
1
Red
CN4
Local CAN Bus (CPU)
2
Green
1
+24 VDC
CN8
Digital Outputs
3
Blue
2
GND
1
OUT 1
4
White
3
CAN +
2
GND
5
GND
4
CAN -
3
OUT 2
5
GND
4
GND
6
+24 VDC
(*) Reserved for factory programming by Automatic Systems.
LD 1
3.3 VDC indicator light
LD2
5 VDC indicator light
LD3
Activity indicator light - Watchdog
LD4
CAN activity indicator light
LD 5
Digital input 2 activity indicator light
LD 6
Digital input 1 activity indicator light
LD 7
Dynamic braking indicator light
LD 8
Digital output 2 activity indicator light
LD 9
Digital output 1 activity indicator light
LD 10
Technical fault indicator light
LD 11
6 VDC indicator light
LD 12
RGB pictogram indicator light, RED
LD 13
RGB pictogram indicator light, GREEN
LD 14
RGB pictogram indicator light, BLUE
LD 15
Pictogram indicator light, WHITE
SW4
CAN address DIP switches
RST
Motor control circuit board reset button

Automatic Systems FirstLane 960 Specifications

General

Brand	Automatic Systems
Model	FirstLane 960
Category	Security System
Language	English