Automationdirect.com GS1-21P0 - Page 67


Desired Frequency Mem Addr 0310H(40785)
Range: 0.0 to 400.0 Hz Default Setting: 0.0
•If the Multi-function output terminal is set to function as Desired Frequency
Attained (3-11 =04 or 05), then the output will be activated when the programmed
frequency is attained.

Desired Current Mem Addr 0311H(40786)
Range: 0.0 to <Drive Rated Amps> Default Setting: 0.0
3-17
3-16
Chapter 4: AC Drive Parameters
GS1 Series AC Drive User Manual
4–28
Time
ON
OFF
Frequency
Maximum Output
Frequency
Desired Frequency
3-16
Desired Frequency
A
ttained Indication
3-11
x Base Frequency (0-02)
Max. Output Frequency =
Motor Max. RPM (0-04)
Motor Base RPM (0-03)
()