AutomationDirect DURAPULSE GS3-4030 - Page 145

4–77
 Parameter Copy
Default Setting: 00
Settings:
00 DISABLE Copy Keypad Function
01 ENABLE Copy Keypad Function
This parameter is used to upload or download information to the drive.
GS Series Number Default Setting: ##
Settings
01 GS1
02 GS3
03 GS3
04 GS4
Manufacturer Model Information Default Setting: ##
Settings
00 GS3-21P0 (230V / 3ph / 1.0 hp)
01 GS3-22P0 (230V / 3ph / 2.0 hp)
02 GS3-23P0 (230V / 3ph / 3.0 hp)
03 GS3-25P0 (230V / 3ph / 5.0 hp)
04 GS3-27P5 (230V / 3ph / 7.5 hp)
05 GS3-2010 (230V / 3ph / 10 hp)
06 GS3-2015 (230V / 3ph / 15 hp)
07 GS3-2020 (230V / 3ph / 20 hp)
08 GS3-2025 (230V / 3ph / 25 hp)
09 GS3-2030 (230V / 3ph / 30 hp)
10 GS3-2040 (230V / 3ph / 40 hp)
11 GS3-2050 (230V / 3ph / 50 hp)
12 GS3-41P0 (460V / 3ph / 1.0 hp)
13 GS3-42P0 (460V / 3ph / 2.0 hp)
14 GS3-43P0 (460V / 3ph / 3.0 hp)
15 GS3-45P0 (460V / 3ph / 5.0 hp)
16 GS3-47P5 (460V / 3ph / 7.5 hp)
17 GS3-4010 (460V / 3ph / 10 hp)
18 GS3-4015 (460V / 3ph / 15 hp)
19 GS3-4020 (460V / 3ph / 20 hp)
20 GS3-4025 (460V / 3ph / 25 hp)
21 GS3-4030 (460V / 3ph / 30 hp)
22 GS3-4040 (460V / 3ph / 40 hp)
23 GS3-4050 (460V / 3ph / 50 hp)
24 GS3-4060 (460V / 3ph / 60 hp)
25 GS3-4075 (460V / 3ph / 75 hp)
26 GS3-4100 (460V / 3ph / 100 hp)
P9.42
P9.41
P9.40
Chapter 4: AC Drive Parameters
DURAPULSE AC Drive User Manual
1st Ed. Rev. D 05/2013