B–5
AutomationDirect PLC Modules for Use with DURAPULSE AC Drives (continued)
DL205 DC Output Modules
D2-08TD1
8 pt. 12-24 VDC current sinking output module, 1 common (2 common terminals),
0.3A/point, 2.4A/module, fused per common (non-replaceable), removable terminal
D2-08TD2
8 pt. 12-24 VDC current sourcing output module, 1 common (2 common terminals),
0.3A/point, 2.4A/module, fused per common (non-replaceable), removable terminal
D2-16TD1-2
16 pt. 12-24 VDC current sinking output module, 1 common (2 common terminals),
0.1A/point, 1.6A/module, no fuse, European type removable terminal
D2-16TD2-2
16 pt. 12-24 VDC current sourcing output module, 1 common (2 common terminals),
0.1A/point, 1.6A/module, no fuse, European type removable terminal
D2-32TD1
32 pt. 12-24 VDC current sinking output module. 1 common (4 common terminals),
0.1A/point, 3.2A/module, no fuse
D2-32TD2
32 pt. 12-24 VDC current sourcing output module, 4 commons (isolated), 0.1A/point,
3.2A/module, no fuse. Requires one connector, sold separately. NOTE: Recommended
pre-wired Ziplink connector cable for this I/O Module is part number ZL-4CBL4#; where #
designates either 0.5, 1, or 2 meter cable lengths. Accessory cable connector module for
ZL-4CBL4# cable is part number ZL-CM40. (Or build a custom cable with D4-IO3264R,
D4-IO3264S or D4-IOCBL-1.)
DL205 Relay Output Modules
D2-04TRS
4-pt. 5-30 VDC or 5-240 VAC isolated relay output module, 4 Form A (SPST) relays, 4
commons, 4A/point, 8.0A/module, replaceable fuse, removable terminal
D2-08TR
8-pt. 5-30 VDC or 5-240 VAC output module, 8 Form A (SPST) relays, 1 common (2
common terminals), 1A/point, 4.0A/module, replaceable fuse, removable terminal
F2-08TR
8-pt relay output, 10A/common, 5-30VDC or 5-240VAC
F2-08TRS
8-pt. 12-28 VDC or 12-240 VAC output module, 5 Form A (SPST) relays, 3 Form C (SPDT)
relays, 8 isolated commons, 7A/point max., no fuses, removable terminal
D2-12TR
12 pt. 5-30 VDC or 5-240 VAC relay output module, 12 Form A (SPST) relays, 2 commons,
1.5A/point max., 3.0A/common, 2 replaceable fuses, removable terminal
DL205 Analog Output Module
F2-02DAS-1
2 channel, 16-bit resolution, Isolated 4-20mA sourcing (2 isolated commons). Designed to
operate with 24 VDC user-supplied power supply
F2-02DAS-2
2 channel analog output, 16 bit resolution, isolated, range: 0-5V, 0-10V (2 isolated
commons). Designed to operate with 24 VDC user-supplied power supply
F2-08DA-1
8 channel analog output module, 12 bit resolution, range: 4-20mA, sink or source output
configurable. Designed to operate with 24 VDC user-supplied power supply.
F2-02DA-2
2 channel analog output module, 12 bit resolution, ranges: 0-5V, 0-10V, -5 to +5V, -10 to
+10V. Designed to operate with 24 VDC user-supplied power supply.
F2-08DA-2
8 channel analog output module, 12 bit resolution, ranges: 0-5V, 0-10V. Designed to
operate with 24 VDC user-supplied power supply.
DL205 Analog Input Modules
F2-04AD-2
4 channel, 12-bit, 0-5V, 0-10V, -5 to +5V, -10 to +10V. Designed to operate with a 24VDC
user supplied power supply
F2-08AD-2
8 channel, 12-bit, 0-5V, 0-10V, -5 to +5V, -10 to +10V. Designed to operate with a 24VDC
user supplied power supply
DL205 Analog Combination Modules
F2-8AD4DA-1
8 channel, 16-bit, 0-20mA in; 4 channel, 16-bit, 4-20mA out. Designed to operate with a
24VDC user supplied power supply.
F2-8AD4DA-2
8 channel, 16-bit, 0-5V, 0-10V in; 4 channel, 16-bit, 0-5V, 0-10V out. Designed to operate
with a 24VDC user supplied power supply.
Appendix B: Using DURAPULSE AC Drives with AutomationDirect PLCs
DURAPULSE AC Drive User Manual
1st Ed. Rev. D 05/2013
To Next Page
Loading...