Autonics LE7M-2 - Page 10

N-90
LE7M-2
Yearly holiday mode
It operates to o󰀨 the output without program adjustment
during previously set yearly holiday period available from
present year to 31, Dec. of the next year.
Designate the start date of yearly holiday and year of end
date as every year [
--
] to repeat the holiday mode for
specied in every year.
● Setting example
Set every year 5, May to o󰀨 the output (OUT1, OUT2).
①
Advance to weekly day change mode
Press
MODE
key over 3
sec to move to the setting
group1 in RUN mode and
press it repeatedly until
cDY
is ashed in second display
part and press
SET
key.
SUN MON TUE WED THU FRI SAT
Press key until month
position ashes and set
May by or key and
press key until date
position ashes. Press
SET
key after set 5th by key.
③
Start date of yearly holiday setting
SUN MON TUE WED THU FRI SAT
The ashing is moved to
month position directly and
press or key to set
May and press key until
date position ashes.
Press
SET
key after set 5th
by or key.
④
End date of yearly holiday setting
SUN MON TUE WED THU FRI SAT
Press
MODE
key to nish the
additional yearly holiday
setting and press
SET
key
to set .
※
It is able to set yearly
holiday up to 12 times.
⑤
Complete to yearly holiday
SUN MON TUE WED THU FRI SAT
②
Standard day selection
Press key to move the
indicator to Saturday and
press
SET
key. after select
Saturday as standard day
(SAT turns ON) by or
key.
SUN MON TUE WED THU FRI SAT
③
Change day selection
Press key to move
the indicator to Monday
and select Monday to
change (MON turns ON)
by or key and repeat
the procedure to select
Tuesday to change (TUE
turns ON) and press
SET
key to complete.
SUN MON TUE WED THU FRI SAT
①
Advance to yearly holiday mode
Press
MODE
key over 3secto
move to the setting group1
in RUN mode and press it
repeatedly until
hDY
ashes
in second display part and
press
SET
key.
SUN MON TUE WED THU FRI SAT
②
Yearly holiday number display
Press
SET
key after check
yearly holiday number.
SUN MON TUE WED THU FRI SAT
Weekly day change
It operates when the specied day mode is required
to install in other day from the set day and it returns to
previous program setting automatically when it is nished.
It is applied to program 1 (P1) and program 2 (P2).
● Weekly day change cancellation
①
Change current year, month, date in current time setting
mode
②
Change standard day
③
Delete all program in program 1 (P1) and program 2 (P2)
④
Season switching
● Setting example
Output 1 (OUT1) is ON in Saturday at 9:00 AM and OFF at
12:00 PM and it is ON 8:30 AM and OFF at 6:00 PM from
Monday to Friday and the mode of Monday and Tuesday is
operated temporarily as Saturday (standard) program.