Autonics LE7M-2 - Program Check, Modify, and Delete; Weekly Program Check, Modify, and Delete; Yearly Program Check, Modify, and Delete

N-92
LE7M-2
RUN mode
Program 1 Yearly program
record No.1 [
r01
]
setting check
Program 1 Yearly program
record No.1 [
r01
] setting
modify and delete
Program 1 Yearly program
record No.2 [
r02
] setting
modify and delete
Program 2 Yearly program
record No.1 [
r01
] setting
modify and delete
Program 1 Yearly program
record No.2 [
r02
]
setting check
Program 2 Yearly program
record No.1 [
r01
]
setting check
CHECK
CHECK
CHECK
Yearly program check, modify and delete
※
YEAR
turns ON when check, modify or delete yearly
program.
● If any key is untouched for 60 sec, it is returned to RUN
mode in weekly or yearly program check.
● In weekly or yearly program check, it controls output
according to program setting and output is OFF in
modify or delete mode.
● When
MODE
key is pressed in weekly or yearly program
record modify, delete stand by or delete mode, current
work is canceled and it is returned to check mode.
● Weekly or yearly program record modify and delete
(1) Program record modify
①
When press
SET
key over 3 sec in program check,
EDT
ashes in second display part, press
SET
key.
②
It returns to check mode when nish the modify same
as the above procedure.
(2) Program record delete
①
When press
SET
key over 3 sec in program check,
EDT
ashes in second display part, press or key until
CLR
ashes in second display part and press
SET
key.
②
Press
CLR
key over 3 sec when
SET
turns ON in second
display part, it returns to program check.
RUN mode
Program 1 weekly program
record No.1 [
r01
]
setting check
Program 1 weekly program
record No.1 [
r01
] setting
modify and delete
Program 1 weekly program
record No.2 [
r02
] setting
modify and delete
Program 2 weekly program
record No.1 [
r01
] setting
modify and delete
Program 1 weekly program
record No.2 [
r02
]
setting check
Program 2 weekly program
record No.1 [
r01
]
setting check
Program Check, Modify And Delete
Press
CHECK
key for 1 sec
CHECK
CHECK
CHECK
Weekly program check, modify and delete
Press
MODE
key
for 3 sec
Press
SET
key for 3 sec
Press
SET
key for 3 sec
Press
SET
key for 3 sec
Press
CHECK
key for 1 sec
Press
MODE
key
for 3 sec
Press
SET
key for 3 sec
Press
SET
key for 3 sec
Press
SET
key for 3 sec
※
It is able to set year of start/end date in yearly program
setting up to 2 years later from the present year.
key is pressed, move the
ashing to hour position and
select PM by or key
when ON time is afternoon.
⑤
ON time setting (AM, PM)
SUN MON TUE WED THU FRI SAT
⑧
Complete to set
Press
SET
key to set ad-
ditional program.
SUN MON TUE WED THU FRI SAT
⑦
Pulse width setting
Press or key 4 times
to select pulse width as 5s
and press
SET
key.
SUN MON TUE WED THU FRI SAT
⑥
ON time setting (hour, Min)
Press or key twice to
set 10 and press
SET
key
after check 00 min
SUN MON TUE WED THU FRI SAT