Do you have a question about the Autonics MP5W-4N and is the answer not in the manual?
Model | MP5W-4N |
---|---|
Category | Measuring Instruments |
Display Method | LED |
Input Type | Pressure |
Protection Class | IP65 |
Mounting | Panel mount |
Display Digits | 4 |
Control Output | 2 |
Power Supply | 12 ~ 24 VDC |
Operating Temperature | -10 to 50 ℃, Storage: -20 to 60 ℃ (no freezing or condensation) |
Storage Temperature | -20 to 60 ℃ |
Series | MP Series |
Product Type | Pressure Indicator |
Output Type | NPN open collector output |
Overview of operation modes, output functions, and general capabilities of the MP5 series.
Details on selecting models based on series, size, output type, and digit count.
Technical details including display, power, input, measuring range, and accuracy.
Physical dimensions and mounting requirements for all MP5 series models.
Visual guides for connecting MP5 series models to external devices.
Information on solid-state and relay contact inputs, voltage, and frequency.
Details on various output types: BCD, serial, PV transmission, RS485.
Overview of available operation modes (F1-F13) and their parameter settings by series.
Detailed breakdown of parameters across groups 0, 1, 2, and 3 for configuration.
Explanations for each of the 13 operation modes and their measurement principles.
Selection and behavior of Standard, High, Low, Block, One Shot, and Deviation output modes.
Explanation of Display Interval, Prescale, Peak Value Monitoring, and Monitoring Delay.
Details on Hysteresis, Lock Settings, Auto-Zero, and Data Bank switching.
Setting time units and instructions for accessing DIP switches by detaching the case.
Structure and commands for MP5 series communication (RS485, serial).
Essential guidelines for setup, wiring, and resolving communication issues.