Autool CT500 User Manual

8
NOTE
During the cleaning process, you can hear the intermittent
(approximately 5 seconds) vibrating sound when you take the
fuel injector out and put it to your ear, so you can judge whether
the fuel injector is working normally.
Ultrasonic cleaning is strictly prohibited when there is no
cleaning agent in the ultrasonic tank to avoid equipment
damage.
Only the ultrasonic cleaning agent dedicated to cleaning the
fuel injection nozzle can be added to the ultrasonic tank, and
other reagents cannot be used instead, otherwise any
malfunctions and damages caused will not be covered by the
warranty.
Injector
diagnostic
This function is to detect the atomization, dripping, blockage, fuel
injection angle status of the fuel injectors and the size and
balance of the fuel injection of each fuel injector at different
speeds.
Preparation
Confirm that the oil drain handle is open, use the funnel in the
accessories to add the test liquid to the equipment through the
glass window, and pay attention to control the flow rate during
the addition to avoid overflow.
Add 1 bottle (about 1000ml) of testing agent each time.
Install the fuel injector.
●
●
●

Autool CT500 Specifications

General

Brand	Autool
Model	CT500
Category	Test Equipment
Language	English