Autostacker™ Parking Lift 4 P/N 5900248 — Rev. B — May 2021
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should always thoroughly
inspect the shipment before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
Do not sign the bill of lading until
after
you have inspected the shipment.
If any of the
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing and/or damaged goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this manual carefully before using your new product.
Do not set up or operate
the product until you are familiar with all operating instructions and warnings. Do not allow anyone else
to operate the product until they are also familiar with all operating instructions and warnings.
General Safety Information
Please note the following:
• The product is a Parking Lift. Use it only for its intended purpose. Do not make any
modifications.
• The product must only be operated by authorized personnel.
• Always wear the appropriate protective clothing when installing, servicing, or repairing your Lift.
• Keep loads centered and balanced on the Platform. Do not overload the Rear end; Autostacker is
designed to support an equal load.
• Use caution when driving onto the Platform with a Vehicle with wet tires.
• When the product is in use, keep all body parts away from it.
• Do not leave the Lift without confirming that each Leg Base is secured on a Safety Lock.
• Make sure all operators read and understand the Installation and Operation Manual. Keep the
manual near the device at all times.
• Make a visual inspection of the product before using it. Check for damaged or missing parts. Do
not use the product if you find any issues. Instead, take it out of service, then contact your
distributor, or Autostacker at autostacker.com/support or support@autostacker.com.
• Make a thorough inspection of the product at least once a year. Replace any damaged or severely
worn parts, decals, or warning labels.
• Routine maintenance and adjustments are the responsibility of the owner and should be carried
out on a regular basis. For more complex maintenance and repairs, contact your independent
maintenance contractor.
To Next Page
Loading...