EasyManua.ls Logo

AUTOTERM PU-27 - Twait Preheater Setting; Warming Up Modes; Twait Warm Up Temperature; Wait Mode Pump Operation

AUTOTERM PU-27
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settingsmenu items:
Warming up
In the additional heater mode, the pre-heater operates with the engine
and maintains the set fluid temperature.
-
Additional heater mode is OFF.
А
Additional heater automatic operation. If the pre-heater is off,
after the vehicle engine starts, the pre-heater will start
automatically. After the engine stops, the pre-heater will shut
off automatically.
If the pre-heater is on, after the vehicle engine starts it will
switch to additional heater mode automatically.
Р
Additional heater manual operation. If the pre-heater is off,
after the vehicle engine starts, the pre-heater will not start
automatically (manual start is required). If the pre-heater is on,
after the vehicle engine starts it will switch to additional heater
mode automatically.
Twait warm up
Additional heater temperature setting. The required temperature value
can be set in the +75 to +95 °С range. The default temperature is +85
°C.
Wait Mode
pump
Setting pump operation in standby mode. In the additional heater
mode, after the heater switches to standby mode, the pre-heater shuts
off and the pump continues to operate. Depending on this setting:
-
The pump operates continuously (from the moment of start to
the moment of pre-heater shutoff).
The pump operates simultaneously with the pre-heater and does not
operate in standby mode.
Vehicle
Setting of interior heater activation (provided the relay harness is
connected to the heater).
-
The interior heater is not activated while the pre-heater is on.
While the pre-heater is on, the interior heater starts
automatically, depending on the fluid temperature.
Vehicle
Setting of interior heater activation temperature. The required
temperature value can be set in the +30 to + 60 °С range. The default
temperature of relay activation is + 40 °C.
Pump with
engine
Setting of pump activation when the engine starts. The pump,
operating together with the heater, can be used for additional
circulation of coolant during vehicle engine operation. The pump will
activate automatically after the engine starts and will switch off after
engine shutoff.
-
The pump will not start.
The pump will start when the engine starts.
More information https://www.caravansplus.com.au

Other manuals for AUTOTERM PU-27

Related product manuals