Need help?Do you have a question about the AUTOTERM PU-27 and is the answer not in the manual?
General| Brand | AUTOTERM |
|---|---|
| Model | PU-27 |
| Category | Control Panel |
| Language | English |
Fluid temp for standby mode. Adjustable +20 to +95 °C.
Configures auto/manual heater operation based on engine status.
Sets additional heater temp. Default +85°C, range +75 to +95°C.
Defines pump behavior in standby: continuous or synchronized with heater.
Controls interior heater by fluid temp, with adjustable activation threshold.
Enables pump operation with engine start for coolant circulation.
Chooses pump type (Bosch or ADVERS) based on pre-heater configuration.
Configures pre-heater control via alarm system if a free channel is available.
Resets all pre-heater settings to their factory default values.
Sets operation based on heater, panel, or exterior temperature sensors.
Sets operation based on power level, with power value adjustable from 0 to 9.
Defines the temperature threshold for switching to standby mode.
Configures ventilation mode (ON/OFF) for air pump operation in standby.
Configures indicator light time (10-120s, continuous) and brightness (0-4).
Defines action for short press vs. long press for heater/pump start.
Adjusts clock accuracy for temp variations, range -59 to +59 sec/day.
Enables or disables the backlighting for control panel keys.
Features unlimited duration startup, capacity/temperature regulation, and LED status.
Offers unlimited startup, capacity/temp control, ventilation modes, and sensor operation.
Enables heater start/shutdown, time setting, and power/ventilation control.
Allows starting heater for 2 hours or operation at max power control mode.
To Next Page
