AUTOTERM PU-27 - 9 Fast Access Timer Activation; 10 Hydronic Pre-Heater Settings

9 Fast access to startup timers activation menu
For fast access to the timer activation menu from the control panel main screen, press
and hold the
key.
This menu is only intended for timer activation.
Timers cannot be edited in this menu.
Action of timers activation menu keys:
Keys
Action
Navigation between timers.
Timer activation / deactivation.
Exit from this menu to the main screen
10 Hydronic pre-heaters settings menu
BINAR-5S heater settings menu:
Action of Settings menu keys:
Keys
Action
Navigation through the menu items
Exit from menu to the main screen
Change menu item value
“Settings” menu items:
Twait preheater
Fluid temperature at which the pre-heater switches to standby mode
(heater shuts off and pump continues to operate). When the fluid
temperature drops, the pre-heater exits standby mode (the heater starts
again). The default value for the switch to standby mode is +88 °C.
The temperature for the switch to standby mode can be set in the +20
to +95 °С range.
More information https://www.caravansplus.com.au