Need help?Do you have a question about the Autotrol Magnum Cv 942 and is the answer not in the manual?
General| Brand | Autotrol |
|---|---|
| Model | Magnum Cv 942 |
| Category | Control Unit |
| Language | English |
Details on operating pressure, water temperature, ambient temperature, and cap bolt torque.
Specifies connection types and sizes for inlet, outlet, tank, brine, and drain ports.
Lists voltage requirements and power draw for different series controls.
Minimum dynamic operating pressure and temperature limits for proper valve operation.
Guidelines for drain line installation, including flow control and air gap requirements.
Specific instructions for regenerating iron filters using the 942Man control.
How to set time of day, regeneration days, and perform manual regenerations.
Guidelines for regenerating iron filters using potassium permanganate with Model 942.
Instructions for adjusting the backwash time for Model 942F filter controls.
Table detailing salt usage per regeneration based on tank size and settings.
Table for regenerant usage per regeneration for KMnO4 applications.
Details on demand-based controls using microprocessors and flow meters.
Information on time clock controls for initiating regeneration/backwash.
Information on preconfigured twin-alternating packages ensuring continuous softened water flow.
Configuration of parallel systems for increased service flow rate and regeneration management.
Troubleshooting chart to identify causes of leaks to the pilot drain in Magnum Cv valves.
To Next Page
