Autotrol Magnum Cv 962 - User Manual

Installation and Service Manual
Magnum Cv and Magnum IT Valves

Autotrol Magnum Cv 962 Specifications

General

Model	Magnum CV 962
Manufacturer	Autotrol
Service Flow Rate	Up to 96 gpm (363 Lpm)
Backwash Flow Rate	Up to 96 gpm (363 Lpm)
Pressure Range	20-125 psi
Operating Temperature	40°F - 110°F (4°C - 43°C)
Temperature Range	40-110°F
Flow Rate	Up to 96 gpm (363 Lpm)

Summary

Installation Profile Summary

Introduction to the Magnum Cv and Magnum IT Series

Assembling the Control to the Magnum Valve

Step-by-step guide for attaching the control module to the valve body.

Magnum General Specifications

General Installation Information

Operating Conditions

Control Settings

Manual

Instructions for operating manual controls (942Man, 942FMan) and regeneration cycles.

Mechanical

Details on mechanical timeclock controls, common settings, and specific filter/iron filter regeneration.

Impulse

Information on impulse controls (952 series) for regeneration initiation and settings.

Electronic

Overview of 962 electronic demand and time clock controls, features, and programming.

Programming Tables

Table I - Level 1 Values

Table IIA

Table IIB

Table IIC

Explanation of Parameter Values for the 962 Single and Parallel Tank Controls

Multi-Tank

Twin Alternating Systems

Information on preconfigured twin-alternating packages for continuous soft water.

Twin Alternating Control Set-Up

Step-by-step procedure for setting up twin alternating controls (962M and 962S).

Twin or Triple Systems

Configuration options for parallel twin or triple tank systems.

Start-Up Procedure

Service Instructions

Magnum Valve Cartridge Removal Procedure

Wiring Diagrams

Model 962 Series Electronic Control Remote Regeneration Initiation

Model 962 Twin Alternating System Main;Secondary Wiring Schematic

Wiring diagram for 962 twin alternating systems, showing main and secondary controls.