Need help?Do you have a question about the Autotrol Magnum Cv 962M and is the answer not in the manual?
General| Brand | Autotrol |
|---|---|
| Model | Magnum Cv 962M |
| Category | Control Unit |
| Language | English |
Detailed steps for assembling the control to the Magnum valve, including camshaft and engagement.
Key requirements for safe installation, including operating conditions, space, and plumbing.
Information on drain line piping, flexible connectors, brining, and pilot drain connections.
Instructions for operating and regenerating the 942Man manual control.
Introduction to 942/942F mechanical timeclock controls for softener and filter use.
Setting time, days, manual regeneration, clock mode, and salt adjustment.
How Series 952 impulse controls initiate regeneration via external signals.
Overview of 962 electronic demand and time clock control models and their features.
Level I program values for various 962 series controls, including range and units.
Detailed Level II program parameters for 962 single, twin, or triple parallel softeners.
Detailed Level II program parameters for the 962F single tank filter control.
Detailed Level II program parameters for 962 twin tank alternating softener systems.
Detailed Level II program parameters for electronic timeclock filter controls.
Detailed Level II program parameters for electronic timeclock softener controls.
Detailed explanation for parameters P1 (Time/Day), P2 (Regen Time), P3 (Hardness), P4 (Salt), P5 (Capacity).
Table detailing error codes (Err1-Err4), their causes, and recommended solutions.
Comprehensive guide for starting up a water conditioning system with a Magnum control valve.
Troubleshooting common problems like failure to regenerate, no/insufficient brine draw, and excessive water.
Solutions for leaks, media loss, pressure drops, salt issues, and error codes.
Addressing twin system standby issues and troubleshooting Magnum Cv pilot drain leaks.
Step-by-step guide for safely removing, inspecting, and reinstalling valve cartridges.
To Next Page
