www.autowatch.co.uk P a g e 8 o f 15
Learning a new PIN code
Before learning your new PIN code, here are
some important things to consider and
remember.
You need to know which buttons of your
specific vehicle can be used for the PIN code.
Ask your installer or contact Autowatch UK.
During the learn procedure, each press of a
button in the PIN code must be no more than 2
seconds apart.
Each press will be confirmed by a single flash of
the Signal Indicator – on some vehicles this can
be difficult to determine as the indication signal
flash could be a predetermined length. If this is
the case, do not worry, simply press the
desired sequence.
Your PIN code must be between 4 and 20
button presses long.
All buttons can be repeated (exceptions to this
will be pointed out to you by your installer or
sales assistant).
Your service button cannot be used more than
4 times in a row in your PIN code.
To Next Page
Loading...
