autoXS EA-2138 - Technical Data and Fault Resolution; Common Faults and Their Solutions; Device Specifications and Cable Lengths

To Next Page

To Previous Page

Technical data

Fault Possible cause Solution

The charger is

not working.

The power plug has not been

properly connected with the

outlet.

Properly connect the power

plug to an outlet.

The outlet has no power. Check the outlet by connect-

ing another device.

Please contact our after sales support for problems not listed here. Our custom-

er service representatives will be happy to help you. You can obtain our service

address from our warranty card. This user manual is also available for down-

load at www.wachsmuth-krogmann.com.

Technical data

Model: EA-2138

Article number: 95402

Protection class:

Mains connection

Input voltage: 220–240V~/50Hz

Output: 60W

Cable length: 5.91ft (1.80m) (length of the cable including

kink protection and plug: 6.23ft (1.90m))

Battery connection

Output voltage/max. Charging

current for 6V/1.2~14Ah

batteries:

6V direct current/0.8A

Output voltage/max. Charging

current for 12V/1.2~120Ah

batteries:

12V direct current/0.8A

Output voltage/max. Charging

current for 12V/1.2~120Ah

batteries:

12V direct current/3.8A

Cable length: 6.40ft (195cm) including battery terminal

clamps