Safety
8
Safety instructions
WARNING!
Risk of electric shock!
A faulty electrical installation or excessive line voltage may result
in an electric shock.
− Only connect the charger if the line voltage of the outlet
corresponds to the rating plate specification.
− Only connect the charger to an easily accessible outlet so
that you can quickly disconnect the charger from the pow-
er grid in case of a failure.
− Do not use the charging cable if it is visibly damaged or if
the power cable or power plug is defective.
− If the power cable of the charger is damaged, to avoid
risks it must be replaced by the manufacturer, its after
sales support or a person with similar qualifications.
− Do not open the housing; instead, have a qualified profes-
sional carry out the repairs. Contact a qualified workshop
for this. Liability and warranty claims are waived in the
event of repairs performed by the user, improper connec-
tion or incorrect operation.
− Only parts that comply with the original device informa-
tion may be used for repairs. Electrical and mechanical
parts, which are essential for providing protection against
sources of danger, are located in this charger.
− The charger must not be operated with an external timer
or with a separate telecontrol system.
− Do not immerse the charger or the power cable or power
plug in water or other liquids.
− Never touch the power plug with damp hands.
− Never pull the power plug out of the outlet by the power ca-
ble; instead, always do so by taking hold of the power plug.
To Next Page
Loading...