Autronica Autro Safe Connecting

Connections to Detectors
Connecting Loop Units, Interactive Fire Detection Systems, 116-P-CONNECTLOOPUNIT/DGB 2007-10-10,
Autronica Fire and Security AS
Page 8
2.6.3 Removing a locked detector head
• To remove a locked detector head, use a suitable tool
(for example a paper clip or similar) to push the
springloaded tongue in, and simply turn the detector
head counter-clockwise.
Use this hole to
access and release
the locking
mechanism.

Autronica Autro Safe Specifications

General

Brand	Autronica
Model	Autro Safe
Category	Smoke Alarm
Language	English