7
• Once this process has been completed the scale will reset itself and will now be connected to
the printer. For more detailed information about connection options such as barcode formats,
date layouts and bps communications please refer to pp. 11-13 in the scale manual.
8. Printer Connection:
Unit price screen should read ‘USb.oUt’ total price screen will read ‘HOST,’ confirming you are
on the printer connection screen.
• Press Enter to confirm your selection
9. Bits Per Second Connection:
Unit price screen should read ‘USb.bPs,’ confirming you are on the BPS screen.
• Press 4: (9600bps)
• Press Enter to confirm your selection
10. Data Type:
Unit price screen should read ‘USb.dFt,’ confirming you are on the data type screen.
• Press 1: (8N1 8 bits data)
• Press Enter to confirm your selection
11. Department Code:
Unit price screen will read ‘d.CodE’ confirming you are on the department code screen.
• Choose a desired two-digit department code between (00-99). (Example: 08)
This will show as the prefix of barcodes.
• Press Enter to confirm your selection
12. Barcode Format:
Unit price screen will read ‘b.Prt.FE,’ confirming you are on the barcode format screen.
• Press any two digits between 00-13 to select a barcode format.
05 is the recommended barcode format.
• Press Enter to confirm your selection
13. Finish:
Unit price screen will read ‘Urt.CFt’ confirming that you are on the final screen.
• Press 2 to finish
• Press Enter to confirm your selection
PRINTER CONNECTION
To Next Page
Loading...
Need help?
General