AVANT 530 - User Manual

64 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

English

Operator’s Manual

2019-

A428527 2019 5 EN 2018-

Read this Operator’s Manual, safety decals,

and other safety related instructions before

operating the loader. If you do not obey these

instructions, there is a risk of serious injury.

Keep all manuals for reference.

523/528/530

Table of Contents

Questions and Answers

T
Tammy PhamAug 6, 2025
Why does my AVANT 530 engine not crank?
- M
  Madison CaldwellAug 6, 2025
  If the AVANT Compact Loader's engine doesn't crank, start by checking if the main switch is turned on. Also, inspect the battery to ensure it's adequately charged. If the battery voltage is too low, charge it. Examine the fuses; if a fuse is blown, replace it, but if it blows again, contact service. Finally, verify that the battery cables are securely connected to the posts, cleaning and retightening them if necessary.
L
lopezmichaelAug 10, 2025
Why AVANT 530 Compact Loader engine cranks but does not start?
- D
  Dr. Edwin HolmesAug 10, 2025
  If the AVANT Compact Loader engine cranks but doesn't start, or starts and stops immediately, begin by checking the fuel level and type. Ensure the tank is filled with the correct fuel. Next, verify that the fuel hoses and fuel filter are clean and not frozen; replace the fuel filter and clean the fuel lines if needed. If it's cold, hold the ignition key in the glow position longer, letting the glow indicator lamp turn off before starting, and extend starting time up to 5 seconds. Also, ensure you are using the correct type of engine oil for cold temperatures. Check that the auxiliary hydraulics control lever is in the center (neutral) position. Lastly, if the battery is discharged or damaged, jump-start it with another battery, then charge or replace it if damaged.
J
James GrayAug 14, 2025
Why is my AVANT 530 hydraulic system overheating?
- D
  Debra HernandezAug 14, 2025
  Your AVANT Compact Loader's hydraulic system may be overheating due to several reasons: the hydraulic oil level might be low, so check and refill it. The oil cooler could be clogged, requiring cleaning of the cooler and fan. A faulty fan could also be the cause, so check, clean, and repair if necessary. If you're using high flow attachments, ensure the auxiliary hydraulics valve is completely opened, and adjust the lever locking plate if needed. Finally, the hydraulic system might be overloaded, so use the attachment at a lower engine rpm, use with 1-pump setting, and check the attachment for faults.
J
Jessica MurphyAug 19, 2025
What to do if the AVANT 530 engine overheats?
- C
  christina73Aug 19, 2025
  If your AVANT Compact Loader's engine is overheating, the first step is to inspect the radiator for any clogs and clean it, along with the fan, from the engine side. Next, check the coolant level and add coolant if it's low. Also, examine the cooling system for leaks, ensuring the coolant pressure reservoir cap is tight and inspecting all hoses and connections.
T
Thomas Ramirez MDAug 22, 2025
What to do if my AVANT 530 engine overheats?
- P
  pbanksAug 23, 2025
  If your AVANT Compact Loader engine is overheating, it could be due to a clogged radiator, so clean the radiator and fan from the engine side. Another possible cause is a low coolant level, in which case you should add coolant. Also, check for a leaking cooling system, ensuring the coolant pressure reservoir cap is tight and inspecting the cooling system, hoses, and connections.
J
Jessica GomezAug 27, 2025
What to do if AVANT 530 Compact Loader engine cranks but does not start?
- P
  Patricia MirandaAug 27, 2025
  If your AVANT Compact Loader engine cranks but doesn't start, or starts and stops immediately, several factors could be at play. First, ensure you have the correct type of fuel in the tank. Also, make sure that the fuel hoses and fuel filter are clean and have not been frozen. Replace fuel filter, clean fuel lines. In cold ambient temperatures, hold the ignition key in the glow position for a longer period. If the glow indicator lamp is lit, allow it to turn off before starting and extend starting time up to 5 seconds. Ensure you are using the correct type of engine oil. Check that the auxiliary hydraulics control lever is in the center (neutral) position. If the battery is discharged or damaged, jump start it with another battery.
A
Alexander JonesAug 31, 2025
How to fix an AVANT 530 when the engine does not crank?
- M
  Michael PerezAug 31, 2025
  If the engine of your AVANT Compact Loader does not crank, start by checking if the main switch is off and turn it on. Next, verify the battery charge and voltage, and charge if necessary. Inspect the fuses and replace any that are blown; if a fuse blows again, contact service. Finally, examine the battery cables and posts for poor connections; clean and retighten them if needed.

Summary

Safety Instructions

Intended use

Safety first

Emphasizes prioritizing safety in all operations and procedures.

General safety instructions

Provides fundamental guidelines for safe operation and personal protection.

Handling of heavy loads

Details safe procedures for managing heavy loads and preventing tipping.

Operation on gradients

Suffocation hazard - Ensure ventilation

Highlights risks of carbon monoxide and need for ventilation.

Personal safety and protective equipment

Specifies required personal protective equipment for safe operation.

Safety frame (ROPS) and safety canopy (FOPS)

Explains the importance and function of ROPS/FOPS structures.

Electric system and handling the battery

Fire prevention

Procedures and precautions to prevent fire hazards.

Technical Specification

Tipping Load

Load diagram

Illustrates tipping loads based on load distance and articulation.

Rated operating capacity

Defines and explains the loader's rated operating capacity (ROC).

Operating Instructions

Operating controls

Starting the engine

Step-by-step procedure for starting the loader's engine safely.

Drive control

How to operate the loader's drive pedals and hand throttle.

Working with attachments

General guidance and requirements for using attachments safely.

Coupling the attachments

Procedures for securely attaching and detaching implements.

Transporting instructions and tie down points

Maintenance and Service

Safety instructions - Read safety instructions before any maintenance work

Critical safety precautions before performing any maintenance tasks.

Maintenance of hydraulic systems

Procedures for checking and maintaining the hydraulic system.

Daily inspections and routine maintenance

Tasks to perform for daily checks and routine upkeep.

Service, engine

Service schedule for periodic service

Recommended schedule for periodic maintenance tasks.

Daily Inspections and Maintenance

General condition of loader

Visual inspection of boom and other metal structures for defects

Engine Inspections and Maintenance

Hydraulic oil level

Engine oil level

Coolant level

Inspections After You Start the Loader

Drive control and steering

Maintenance and Service

Troubleshooting

AVANT 530 Specifications

General

Brand	AVANT
Model	530
Category	Compact Loader
Language	English

Related product manuals

Preview: AVANT 520

Preview: AVANT 523

Preview: AVANT 528

Preview: AVANT 500 Series

AVANT 500 Series

Preview: AVANT 500 Series 2019

AVANT 500 Series 2019

Preview: AVANT 423

Preview: AVANT 220

Preview: AVANT 745