7 (40)
3. Safety instructions for using the attachment
Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly
powerful and improper or careless use or maintenance may cause serious personal injury or property
damage. Due to this, all operators must carefully familiarise themselves about correct use and the operator's
manuals of both the loader and the attachment before starting operation. Do not use the attachment if you
have not completely familiarised yourself with its operation and the related hazards.
DANGER
Misuse, careless use, or using an attachment that is in poor condition may
cause risk of serious injuries.
Familiarise yourself with the controls of the loader,
correct coupling procedure, and the correct way to operate the attachment at a safe
area. Study especially how to stop the equipment in a safe manner. Read all safety
precautions carefully.
Read all safety instructions carefully before handling the attachment
WARNING
When attaching an attachment to the loader, ensure that the locking pins of the
loader's quick attach plate are in the lower position and that they have locked
the attachment to the loader. Never lift or move an unlocked attachment.
This attachment is designed to be used by one operator at a time. Do not let others
near the danger area of the equipment when it is in use.
Always transport the attachment as low as possible to keep the centre of gravity low,
and keep the telescopic boom retracted during driving.
Impact hazard - Thrown objects. Do not let bystanders stand closer than the safety
distance of 5 metres from the machine. Stop the attachment if others get within the
safety distance.
Severing and crushing hazard - Sharp and strong blades rotate at high speed.
Use the attachment only while lowered against the ground. Running the attachment
in any other position may expose the blades, making contact with them possible,
and will also cause a hazard of flying debris. Stop if others are present at working
area. Use only if all covers in place.
Risk of cutting, severing, and entanglement - Never leave the driver’s seat
when the attachment is running or if the auxiliary hydraulics control lever is
locked on.
Always return the auxiliary hydraulics control lever to its neutral position,
following the safe stopping procedure. The blades move for a short period of time
after the hydraulic supply has been shut off. Wait until the blades have stopped
completely before going near the attachment.
Risk of crushing under the attachment or the loader boom - Lower the
attachment firmly on the ground before leaving the driver’s seat.
Make sure that
the attachment is properly supported during any maintenance or inspections. Do not
leave the driver’s seat when the loader boom is lifted. Going under a raised
attachment or loader boom is dangerous, as the boom may lower due to loss of
stability, mechanical fault, or if another person operates the controls of the loader.
Be sure not to tilt the flail mower too far up, since this can make it swing over towards
the loader boom. Keep the flail mower at a low height.
Keep hands and feet away from moving components. Risk of entanglement, do not
wear loose clothes, such as loose shoelaces, or long scarves, should be avoided
when working with the attachment.
To Next Page
Loading...
