EasyManua.ls Logo

Avanti WD31EC - User Manual

Avanti WD31EC
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MODEL NUMBER / NUMERO DE MODELO:
WD31EC
THERMOELECTRIC WATER DISPENSER
ENFRIADOR DE AGUA TERMOELECTRICO
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
La sección en español empieza en la página 12.
Avanti Products, A Division of the Mackle Co., Ltd.
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com

Questions and Answers

  • F
    felicia98Jul 31, 2025
    Why is the water from my Avanti WD31EC not cold enough?
    • K
      Kristen RodriguezJul 31, 2025
      If the water from your Avanti Water Dispenser isn't cold enough, first, make sure that the COLD switch on the back of the unit is turned ON. Also, remember that if you dispense too much water in a short period, the unit might need time to cool down. If you've dispensed more than two 8 oz cups within 25 minutes, allow up to one hour for the water to reach its optimal temperature.
  • C
    Cassandra WeissAug 7, 2025
    Why is the water from my Avanti WD31EC Water Dispenser not hot enough?
    • J
      Jason PetersonAug 7, 2025
      If the water from your Avanti Water Dispenser isn't hot enough, first, ensure that the HOT switch on the back of the unit is turned ON. Also, remember that dispensing too much water in a short period can affect the temperature. If you've dispensed more than two 8 oz cups within 25 minutes, allow up to one hour for the water to reach its optimal temperature.
  • C
    claneAug 14, 2025
    What to do if my Avanti Water Dispenser does not operate?
    • K
      Kimberly KelleyAug 14, 2025
      If your Avanti Water Dispenser isn't working, start by ensuring it's properly plugged into a working electrical outlet. Also, check your circuit breaker or fuse box to see if a breaker has tripped or a fuse has blown.
  • B
    Bradley Campbell MDAug 21, 2025
    How to stop vibrations in my Avanti Water Dispenser?
    • R
      Robert BlackAug 21, 2025
      If your Avanti Water Dispenser is vibrating, check to make sure that the unit is level. Adjust the leveling feet as necessary to stabilize the dispenser.

Summary

If You Need Service

Important Safety Instructions

General Safety Precautions

Crucial safety advice to follow when using the appliance to prevent hazards.

Installation Guidelines

Placement and Power Requirements

Instructions on where to place the dispenser and how to connect it to a power outlet.

Operating Your Water Dispenser

Electrical Connection and Safety

Details on safely connecting the dispenser to a grounded electrical outlet and avoiding adapters.

Control and Display Panel

Operating Modes and Indicators

Explains the function of the Energy Saving and Normal modes, including indicator lights and temperature cycles.

Hot Water Dispensing

Troubleshooting Guide

Common Problems and Solutions

Lists common dispenser issues like no operation, temperature problems, or vibrations, with possible causes.

Customer Service and Support

Contacting Avanti for Assistance

Provides phone numbers for product information, ordering parts, and scheduling in-home repairs.

Avanti Products Warranty

Avanti WD31EC Specifications

General IconGeneral
AC input voltage110 V
AC input frequency60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth323.8 mm
Width311.1 mm
Height400 mm
Weight4082 g

Related product manuals