Why is my Avanti Water Dispenser not cold enough?
If your Avanti Water Dispenser isn't cooling enough, first ensure the cold switch on the back is turned ON. Also, check that the dispenser has enough clearance around it for proper ventilation.
What to do if the water bottle on my Avanti Water Dispenser is hot?
If the water bottle of your Avanti Water Dispenser is hot, press the hot dispenser button until water flows to remove air from the hot tank. This will address the issue of water boiling in the hot tank and bubbling up into the bottle.
Why is the hot water on my Avanti WDP75 not hot enough?
If the hot water from your Avanti Water Dispenser isn't hot enough, check to be sure the hot switch on the back is turned ON.
What to do if my Avanti WDP75 Water Dispenser does not operate?
If your Avanti Water Dispenser isn't working, make sure it's properly plugged into the outlet. Also, check your circuit breaker or fuse box, as a tripped breaker or blown fuse could be the cause.
Why does the Avanti WDP75 compressor turn on and off frequently?
Your Avanti Water Dispenser's compressor might be turning on and off frequently because the room temperature is hotter than normal, the temperature control is not set correctly, or the water dispenser doesn't have enough space around it for proper ventilation.
Why is my Avanti WDP75 Water Dispenser making so much noise?
If your Avanti Water Dispenser is making too much noise, a rattling sound may come from the flow of the refrigerant, which is normal. Also, contraction and expansion of the inside walls may cause popping and crackling noises. Finally, ensure that the water dispenser is level.
How to stop Avanti WDP75 from vibrating?
To stop vibrations in your Avanti Water Dispenser, check to make sure that it is level.
What to do if the bottle of my Avanti WDP75 feels warm?
If the bottle of your Avanti Water Dispenser feels warm, dispense cold water until air is released into the bottle to resolve the issue of the water system being overfilled.
Provides Avanti Customer Service phone number and details for warranty.
Basic precautions to reduce risk of fire, electrical shock, or injury.
Recommendations for proper placement, ventilation, and electrical connection.
Guidelines for safe electrical connection, emphasizing grounding and outlet type.
A guide to diagnose and resolve common problems with the water dispenser.
Explains what is covered, not covered, and the duration of the warranty.
General| Loading Type | Top Loading |
|---|---|
| Hot Water Temperature | 185°F |
| Material | Plastic |
| Water Types | Hot, Cold, Room Temperature |
| Cold Water Temperature | 10°C |
| Power Consumption | 500W |
| Voltage | 115V |
To Next Page
