Why is my Avanti Water Dispenser not cold enough?
If your Avanti Water Dispenser isn't cooling sufficiently, make sure the cold switch on the back of the unit is turned ON. Also, ensure that the dispenser has enough space around it for proper ventilation.
Why is the hot water not hot enough in my Avanti WD361?
If the hot water from your Avanti Water Dispenser isn't hot enough, check to be sure the hot switch on the back is turned ON.
What to do if the bottle on my Avanti Water Dispenser feels warm?
If the bottle on your Avanti Water Dispenser feels warm, it might be overfilled. Dispense cold water until air is released into the bottle.
Why is the water bottle hot on my Avanti WD361?
If the water bottle on your Avanti Water Dispenser is hot, it could be due to water boiling in the hot tank and bubbling up into the bottle. Press the hot dispenser button until water flows to remove air from the hot tank.
Why is the hot water on my Avanti Water Dispenser not hot enough?
If your Avanti Water Dispenser's hot water isn't hot enough, make sure the hot switch on the back of the unit is turned ON.
Why does the bottle on my Avanti WD361 Water Dispenser feel warm?
If the water bottle on your Avanti Water Dispenser feels warm, it might be overfilled. Try dispensing cold water until air is released into the bottle.
Why is the water bottle on my Avanti WD361 Water Dispenser hot?
If the water bottle on your Avanti Water Dispenser is hot, it means the water is boiling in the hot tank and bubbling up into the bottle. Press the hot dispenser button until water flows to remove air from the hot tank.
How to troubleshoot an Avanti WD361 Water Dispenser that does not turn on?
If your Avanti Water Dispenser isn't working, first, make sure it's properly plugged into a functioning power outlet. Then, check your circuit breaker or fuse box to see if a breaker has tripped or a fuse has blown.
What to do if the Avanti WD361 Water Dispenser compressor keeps turning on and off?
If the compressor in your Avanti Water Dispenser is cycling on and off too often, and the room temperature is higher than usual, try adjusting the temperature control. Also, make sure the water dispenser has enough space around it for proper ventilation.
How to stop vibrations in Avanti WD361 Water Dispenser?
If your Avanti Water Dispenser is vibrating, check to make sure that it is level.
Record model and serial numbers for service and reference.
Check the troubleshooting guide for common issues before calling for service.
Contact the original servicer first to resolve service issues.
Send detailed information to Avanti Customer Service if issues persist.
Guidelines for using extension cords safely and their specifications.
Advice on using surge protectors to prevent damage from power surges.
Check included parts and flush the system before initial use.
Procedure for safely replacing an empty water bottle with a new one.
How to operate and interpret the cold water indicator and function.
How to operate the hot water faucet and its safety guard.
Information on optional cup dispenser installation and ordering.
Steps for preparing the dispenser for long-term storage.
Guide to identify and resolve common operational problems.
Contact details for product support, parts, and repair services.
Details of the one-year warranty coverage for defects in material and workmanship.
Information on the limited compressor warranty for years two through five.
List of conditions and factors not included within the product warranty.
Register to keep product information on file for insurance claims and protection.
Provide feedback to help develop future products that meet customer needs.
General| AC input voltage | 110 V |
|---|---|
| AC input frequency | 60 Hz |
Weight and Dimensions| Weight | 11340 g |
|---|---|
| Dimensions (WxDxH) | 292.1 x 304.8 x 876.3 mm |
To Next Page
