Avanti WIMD332PC-IS - User Manual

24 pages

Save Page as PDF

To Next Page

ICE/WATER DISPENSER

DISPENSADOR DE AGUA Y HIELO

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Model Number

WIMD332PC-IS

No. de Modelo

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 15.

Avanti has a policy of continuous improvement on its products and reserves the right to change

materials and specifications without notice.

AVANTI PRODUCTS LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

Questions and Answers

C
Christopher GuerreroAug 8, 2025
Why is my Avanti WIMD332PC-IS compressor running but not making ice?
- D
  Deanna PerezAug 8, 2025
  If your Avanti Water Dispenser's compressor and fan are running, but no ice is being made, it could be due to a few reasons. First, check if there's a water shortage and add water if needed. Another possibility is that air has blocked the water system; try opening the drain hose to release some water and then push the ON/OFF button. If neither of these solutions work, there may be a cooling system leakage, which requires professional service.
B
brucecarrollAug 22, 2025
What to do if my Avanti WIMD332PC-IS does not start?
- C
  courtneybrennanAug 22, 2025
  If your Avanti Water Dispenser isn't starting, first ensure it's properly plugged in. If it is plugged in, try pressing the ON/OFF button to turn the unit on. If these steps don't work, it may require professional service.

Summary

APPLIANCE SAFETY

IMPORTANT SAFEGUIDES

Electrical connection

IMPORTANT SAFETY INSTRUCTIONS

Before Using Your Ice Maker

Steps for unpacking, checking parts, and initial cleaning before use.

Installation of Your Appliance

Guidelines for placement, ventilation, and electrical connection for installation.

OPERATING YOUR ICE MAKER

Control Panel Description

Explanation of display icons and button functions on the control panel.

Starting your Ice maker

Steps to set up the ice maker before its first use.

Starting the Ice Making Cycle

Process to initiate the ice production cycle and select ice size.

Dispensing ice.

Dispensing Cold Water.

CARE AND MAINTENANCE

Cleaning Your Ice Maker

PROBLEMS WITH YOUR ICE MAKER?

TROUBLESHOOTING GUIDE

Lists common problems, their possible causes, and suggested resolutions.